- Who is responsible for CDM?
- What is the main aim of CDM regulations?
- What does CDM stand for?
- What is a CDM principal designer?
- Does a principal designer need to be a designer?
- What is the purpose of CDM?
- Does my project fall under CDM?
- What are the 5 main parts of CDM?
- What are the current CDM regulations?
- Does CDM apply if only one contractor?
- Do I need CDM?
- Can the architect be the principal designer?
- Do I need a principal designer?
- What is a CDM contract?
- Can you have 2 principal contractors?
Who is responsible for CDM?
The CDM Regulations place responsibility for managing the health and safety of a construction project on three main duty holders.
The client has overall responsibility for the successful management of the project and is supported by the principal designer and principal contractor in different phases of the project..
What is the main aim of CDM regulations?
The purpose of the CDM regulations is to focus the attention of the project team on the health and safety aspects of the project, to improve the planning and management of projects, to facilitate the early identification of hazards, and to place responsibilities and efforts where they can most benefit health and safety …
What does CDM stand for?
Construction (Design and Management) Regulations 2015Construction (Design and Management) Regulations 2015 (CDM 2015) The information in these web pages will help you understand what you need to do under the Construction (Design and Management) Regulations 2015 (CDM 2015), which came into force in April 2015.
What is a CDM principal designer?
Construction (Design and Management) Regulations 2015 A principal designer is a designer who is an organisation or individual (on smaller projects) appointed by the client to take control of the pre-construction phase of any project involving more than one contractor.
Does a principal designer need to be a designer?
A principal designer must be a designer as defined, and must be able to demonstrate they have the health and safety skills, knowledge and experience (SKE), and where they are an organisation, the organisational capability, to carry out the work they are being appointed for.
What is the purpose of CDM?
Whatever your role in construction, CDM aims to improve health and safety in the industry by helping you to: sensibly plan the work so the risks involved are managed from start to finish. have the right people for the right job at the right time. cooperate and coordinate your work with others.
Does my project fall under CDM?
CDM 2015 applies to all construction projects, just like CDM 2007 did. That’s right, every construction project. … However, this is no longer the case under CDM 2015. Under CDM 2015, even if your project is non-notifiable, you must still comply with all the CDM duties (other than the duty to notify the HSE).
What are the 5 main parts of CDM?
The guidance content is as follows:Introduction.Part 1 – Commencement, interpretation and application.Part 2 – Client duties.Part 3 – Health & Safety Duties and Roles.Part 4 – General requirements for all construction sites.Part 5 – General.Schedule 1 Particulars to be notified under regulation 6.More items…
What are the current CDM regulations?
The Construction (Design & Management) Regulations (CDM 2015) are the main set of regulations for managing the health, safety and welfare of construction projects. CDM applies to all building and construction work and includes new build, demolition, refurbishment, extensions, conversions, repair and maintenance.
Does CDM apply if only one contractor?
One of the key duties of the principal contractor is to manage coordination and cooperation between contractors, and ensure they comply with their duties under CDM. As there is only one contractor involved in the project, the management of other contractors is not required.
Do I need CDM?
The Construction (Design and Management) Regulations 2015 (CDM regulations) require that the Health and Safety Executive (HSE) must be notified of any project defined as construction under the regulations where the construction work is likely to last longer than 30 working days and have more than 20 workers working …
Can the architect be the principal designer?
The principal designer should be the designer in overall control of the pre-construction phase of the project. This is usually the lead architect, or sometimes the sole architect on the project.
Do I need a principal designer?
The principal designer role is required under the Construction (Design & Management) Regulations (CDM). … Every construction project must comply with CDM, and that includes appointing the necessary CDM duty holders. Under CDM, a principal designer must be appointed: By the client.
What is a CDM contract?
The Construction (Design and Management) Regulations (the ‘CDM Regulations’) are intended to ensure that health and safety issues are properly considered during a project’s development so that the risk of harm to those who have to build, use and maintain structures is reduced.
Can you have 2 principal contractors?
A construction project can only have one principal contractor at any given time. The conceptual rationale for this is clear.